|
|
Cabinet Box;
Cabinet grade 3/4"
panel construction. Melamine interiors with solid wood veneered
panels at finished ends. All cabinet joints are either datoed,
glued or screwed or a combination of all when applicable. All
cabinets have full - clean backs with integrated nailers on the
outside of the back for a clean appearance.
Face Frame;
13/16" thick, clean
and clear furniture selected solid lumber fgace frame stocks.
Glued and pocket screwed from behind for exceptional strength.
All face frames are full glued and clamped on boxes. No nails
are required for a exceptional finished product. No nail
holes to putty and discolor!
Shelves;
All shelves are 3/4" thick and fully adjustable up to 34" wide. Wider shelves will have either additional supports or solid wood edging for strength. Solid wood edging for decoration is common.
Drawers;
All drawer boxes are full,
four sides boxes. Stock boxes are _" melamine for a clean
and wipeable surface. Even our melamine drawer boxes are dovetail
jointed for strength! Our most common enhancement suggesting
a craftsman built cabinet is our fully finished, birch 10 ply
wood drawer box, dovetailed and sanded. Plywood
boxes do not warp like solid wood boxes wich becomes noticeable
when using side mount ball bearing glides that can bind a box
not perfectly square.
Hardware;
All hardware for components
are the simply the best we can find. Snap on, fully adjustable
concealed hinges are 'state of the art' for cabinet doors. Our
standard drawer glide, though similar to less expensive glides
are epoxy coated (this is better than paint and wont rust) and
have Nylon wheels, which are better than plastic.
A very common upgrade is to a ball bearing, 100# capacity full
extension glide. Both are side mounted to the cabinet sides for
strength!
Doors and fronts;
Though the options are
endless our 'standard' drawers and doors are 13/16 solid lumber.
Doors are 5 piece-raised panel and fronts are solid slab with
your choice of various panel and edge profiles.
Stains and Colors;
Many stock stains are
available and will likely fit your intended look. However, sometimes
custom stains and paints are needed for matching existing woodwork
or specifications. Understanding the many variables that wood
and finishes have we are fully capable, more than most, to similarly
match to your requirements.
Finish;
Our stock varnish is a
very strong, durable and beautiful conversion varnish. Three coats
are generously applied to all products giving the look, feel and
durability which is unequaled by other shops that pre finishing
wood products.
Accessories;
Endless options to further
customize and enhance you project are available either in house
or brought it just for you!
Installation;
Professional installation
by our own employees. Caring in the exactness of the install as
to what it took to get there.., no job is complete until it is
installed properly. We design and manufacture each project with
the installation in mind. And that shows.